How to connect Freestanding Motorhome Awnings.

Writen By: Amanda Cochrane
Published In
17 Nov / 2015

A Freestanding Motorhome Awning allows Motorhome users to have full use of an awning which can be left on site while you drive off for the day.  There are a number of ways to attach a Freestanding Motorhome 

You can attach it to your wind out canopy by simply winding out your canopy to head height, lift the tunnel section of the awning up to the canopy, attach it to the canopy with the driveway fixing kit (see below) and wind your canopy in.  This will lift up your tunnel to the desired position. 

Free standing  Free standing


Peg out the base of the tunnel under the Motorhome in order to get it as close to the Motorhome as possible.

If you do not have a canopy either use a C Channel or you can throw the straps (which come supplied) over the roof and peg them down on the other side of you Motorhome. 


Free standing   


Free standing   (Please note that you will not get a wind tight seal on the tunnel) The tunnel is merely to act as an umbrella effect to give you some protection from the elements; your habitation area will give you a wind tight seal and gives you full protection.